Description
4448SH2C.12 New Cherry 15 Amp, 125 Volt / 250 Volt, Normally Open, Plunger Type Pushbutton Snap Action SPDT MicroSwitches, Part Number 0E13-01MU, or 0E1301MU, or E13-01MU, or E1301MU. Each bid quantity is for a Lot of Two (2) Switches With Mounting Hardware. You may bid / buy any number of lots, up to the total quantity available above. These switches were purchased from an industrial liquidator last year, and they were brand new in the original factory boxes. We repackaged them into 4-mil Ziplok bags for resale. These are nice sturdy switches for a multitude of applications. The contacts are Normally Open. That is to say, no current flows through them until the button is pressed. Press the button and the light comes on, electric motor starts running, etc. Written on the switch: E13 P MEXICO (Underwriters Recognized certification mark) 15A 125 or 250 VAC (CSA certification mark) T200 3/4 HP 125VAC 1-1/2 HP 250 VAC 0E13-01MU 48-08 According to the calipers: Overall length: 2.658" / 67.52 MM Length (excluding terminals): 1.831" / 46.52 MM Width: .642" / 16.31 MM Overall height: 1.371" / 34.83 MM Height (excluding button & ferrule): .638" / 16.21 MM Button diameter: .246" / 6.26 MM Bushing / Ferrule diameter: .371" / 9.42 MM Mounting holes: #6 machine screws, spaced 1.000" OC (on centers) According to the manufacturer: E13 SERIES Specifications Temperature Rating: 105°C Flammability Rating: UL94HB Materials: -- Case: General Purpose Phenolic -- Bushing / Ferrule: Brass -- Actuating Button: Stainless Steel -- Common Terminal: Brass -- Moving Blade: Brass -- Spring: Stainless Steel -- Contacts: Silver Alloy UL1054 Rating: 15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC; 2A 48VDC Terminals: Standard 0.250" x 0.032" (6.35mm x 0.81mm) Mounting -- Recommended mounting screw: #6-32 round head -- Recommended torque on screw: 6 inch-lbs. max -- Recommended maximum torque for ferrule: 20 inch pounds Operating Force: 0.70 LB / 317 g Pre-Travel: .058" / 1.44 MM Over-Travel: .250 / 6.34 MM