-40%
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0
Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0

Lot 2 Cherry E13 15A Normally Open/Closed Pushbutton Switch 125/250 VAC E13-65L0

$ 6.34

  • Application: Appliances, Automotive, Commercial, Control Equipment Panels, Conveyance Lines, Electrical Wiring, Electronics
  • Brand: Cherry Electrical
  • Bulb Compatibility: Any
  • Color: Black
  • Contact Configuration: Single Pole, Double Throw (SPDT)
  • Contact Material: Silver Alloy
  • Current Rating: 15 A
  • Current Type: AC/DC
  • Features: Dual N/O or N/C Operation
  • Finish: Black
  • HP Rating: 3/4 HP 125VAC, 1-1/2 HP 250 VAC
  • Item Height: 1.236" / 31.41 MM
  • Item Length: 2.629" / 66.78 MM
  • Item Width: .647" / 15.94 MM
  • MPN: E13-65L0
  • Material: Phenolic
  • Maximum Amperage: 15A
  • Model: E13
  • Mounting Style: Threaded Bushing or Machine Screws
  • Number in Pack: 2
  • Number of Circuits: 1
  • Number of Outlets: 1
  • Number of Positions: 2
  • Operating Force: 0.70 Lb / 317 g
  • Operating Temperature: 105°C (Max)
  • Operation: Normally Open, Snap Action
  • Operation Method: Momentary/On or Momentary/Off
  • Over-Travel: .124 / 3.15 MM
  • Port Type: 1/4" Quick Connect / Spade Terminals
  • Pre-Travel: .022" / .56 MM
  • Room: Dungeon, Basement, Garage
  • SELLER LOCATION: USA
  • Smart Home Compatibility: Any Applicable
  • Standards/Compliance: UL CSA
  • Suitable For: Interior, Wall
  • Switch Action: Momentary, SPDT
  • Switch Style: Plunger / Pushbutton
  • Termination Type: 1/4" Quick Connect
  • Type: Plunger MicroSwitch
  • UPC: Does not apply
  • USA SHIPPING DEAL: Pay Shipping For One, Then ALL SHIP FREE
  • gtin13: Does not apply

Description

4454SH2H.11 New Cherry 15 Amp, 125 Volt / 250 Volt, Normally Open, Plunger Type Pushbutton Snap Action SPDT MicroSwitches, Part Number E13-65L0, or E1365L0. Each bid quantity is for a Lot of Two (2) Switches With Mounting Hardware. You may bid / buy any number of lots, up to the total quantity available above. These switches were purchased from an industrial liquidator last year, and they were brand new in the original factory boxes. We repackaged them into 4-mil Ziplok bags for resale. These are nice sturdy switches for a multitude of applications. The contacts are Normally Open or Normally Closed, so they can be wired two different ways; depending on which terminal is used: Using the curved "NO" terminal, no current flows through the switch until the button is pressed. Press the button and the light comes on, electric motor starts running, etc. Using the straight "NC" terminal, current flows through the switch continuously until the button is pressed. Press the button and the light goes off, electric motor stops, etc. Written on the switch: E13 P CHINA (Underwriters Recognized certification mark) 15A 125 or 250 VAC (CSA certification mark) 3/4 HP 125VAC 1-1/2 HP 250 VAC 14-09 According to the calipers: Overall length: 2.629" / 66.78 MM Length (excluding terminals): 1.820" / 46.23 MM Width: .647" / 15.94 MM Overall height: 1.236" / 31.41 MM Height (excluding button & ferrule): .638" / 16.21 MM Button diameter: .246" / 6.26 MM Bushing / Ferrule diameter: .368" / 9.36 MM Mounting holes: #6 machine screws, spaced 1.000" OC (on centers) According to the manufacturer: E13 SERIES Specifications Temperature Rating: 105°C Flammability Rating: UL94HB Materials: -- Case: General Purpose Phenolic -- Bushing / Ferrule: Zinc -- Actuating Button: Plastic -- Common Terminal: Brass -- Moving Blade: Brass -- Spring: Stainless Steel -- Contacts: Silver Alloy UL1054 Rating: 15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC; 2A 48VDC Terminals: Standard 0.250" x 0.032" (6.35mm x 0.81mm) Mounting -- Recommended mounting screw: #6-32 round head -- Recommended torque on screw: 6 inch-lbs. max -- Recommended maximum torque for ferrule: 20 inch pounds Operating Force: 0.70 LB / 317 g Pre-Travel: .022" / .56 MM Over-Travel: .124 / 3.15 MM